hp envy printer photo tray blocked

HP Envy Printer Photo Tray Blocked Issues – 123.hp.com/envy4510

What to do when your HP Envy Printer Photo Tray Blocked

Sometimes the HP Envy printer photo tray blocked because HP Envy printers do not have a separate photo tray as the other models and they make use of a single input for different types of printing media. Presented here are some remedial measures that are applicable for the following printer models,

  • HP Envy 5640
  • HP Envy 5660
  • HP Envy 7640
  • HP Envy 7645
  • HP OfficeJet 5740
  • HP OfficeJet 5745
  • HP OfficeJet 8040
  • HP OfficeJet 8045

Photo tray alignment

  • Make sure that the photo tray is aligned properly
  • Also, make sure that the printer is placed on a flat surface so that you can align it
  • The photo tray must be able to move without any friction with the paper tray guides
  • Access the output tray extender of the printer and ensure that it remains PUSHED IN
  • Access the input tray of the printer and that it is PULLED OUT
  • But do not completely remove the input tray from the printer
  • After pulling out the input tray, you must now remove the output tray from the printer
  • Now, the photo tray of the printer must be seated in the correct position within the input tray
  • If done correctly, the grey tab of the photo tray will be seated perfectly on the black tab of the input tray
  • Both these trays must be aligned in line with the main input tray guide of the printer
  • In case the alignment of these tabs and trays are not proper, then the HP Envy printer photo tray blocked
  • After the alignment process, you will find that the photo tray is able to move within the input tray without showing any resistance
  • Now, the output tray which was removed earlier must be reinstalled into the printer (123.hp.com/envy4510)
  • The edges of the output tray must be in line with the edges of the input tray
  • After fixing the output tray, once again ensure that all trays are aligned properly and are able to move freely without showing any resistance

Test Print

  • To check if this installation was successful, you must do a test print on your printer
  • Make sure the printer is connected to your PC and search for an image file on it
  • Try printing the image file using a photo paper loaded in the photo tray of the printer
  • If the HP Envy printer photo tray blocked, then your test print will not be successful
  • You will have to service your printer if the above-mentioned troubleshooting steps fail

You can also call our toll-free number +1-855-602-1890 if you need any assistant to resolve your HP Envy printer photo tray blocked issues. To know more visit us at 123-hp-com-envy.com

2291

Leave a Reply

Your email address will not be published. Required fields are marked *