computer won’t connect to printer wirelessly

Troubleshooting When Computer Won’t Connect To Printer Wirelessly – 123.hp.com/envy4510

Computer Won’t Connect to Printer Wirelessly

Your computer won’t connect to printer wirelessly? Troubleshoot with the help of this blog. You might encounter this problem in the following ways.

  • You have connected to your network, but have connection related issues.
  • If you have trouble connecting to the wireless network

Use the following steps to rectify the above problems

Step 1: Use this if your printer was working over the network proper previously but have trouble now

Most of the times, restarting your device will help you resolve the issue.

  • Restart all your devices (Printer, computer, and the router)
  • Do the following to check if your computer won’t connect to printer wirelessly
    • Verify if printer is connected to a wireless network
    • You can try to print the wireless status report from the printer control panel.
    • Most devices will print the status directly when you press the wireless icon on the printer control panel.
    • Check the following on the wireless status report
      • See if the diagnosis under connectivity area shows “Pass”.
      • if not, then you have not connected your printer to any network
      • Turn on your Wi-Fi router.
      • Try to connect your printer to your wireless connection again
      • Look for messages on top of the report for the solution.
      • Check if the network name in the report matches with your wireless network name.
      • If the computer won’t connect to printer wirelessly
        • You may not have connected your printer to the network, connect it again.

Step 2: You were never able to connect your printer to a wireless network

  • Disconnect all your devices from the power source.
  • Reconnect your devices again.
  • Check if you have installed the printer driver software (123.hp.com/envy4510).
  • If not install the printer driver software.
  • Check the status of the wireless connection
    • If you find a solid light blue in color
      • Your printer is connected to a wireless network
    • If the light on the wireless icon on the printer control panel is not working
      • The wireless connection is turned off.
      • Press the wireless icon to turn on the wireless connection.

When the computer won’t connect to printer wirelessly:

  • Wait until your printer gets connected to the wireless network
    • If you find a solid blue light it means your wireless connectivity is good.
    • the blue light on the printer control panel is blinking the read the following section

The wireless icon’s blue light is blinking

  • The printer must have lost the connection
  • It must be attempting to connect to the router.
  • You can try to reconnect your printer to the wireless network again
  • Move your Router closer to your printer.

Visit our website 123-hp-com-envy.com or contact us at our toll-free numbers +1-855-602-1890 for any help on computer won’t connect to printer wirelessly problem.

743

Leave a Reply

Your email address will not be published. Required fields are marked *